Operation
Transporting the Machine
82 82
9811/5700-7
Unloading a Machine from the
Transporting Vehicle
1 Position the transporting vehicle on firm level ground.
2 Apply the park brakes and lower any stability jacks.
3 Position the loading ramps securely on the
transporter.
Note: Ramps should be level with each other in the
lowered position.
4 Remove the securing straps from the machine and
stow them.
5 Start the machine, tilt the mast back and raise the
forks. Raise the carriage far enough so that the forks
do not foul on the ramps when you drive off.
K
Fig 66. ( T 82).
6 Carefully drive the machine slowly off the ramps and
transporter.
800990-2
Fig 66.
To Next Page
Loading...
