EasyManua.ls Logo

jcb RTFL 940 - Fire Extinguisher (if Fitted); Checking the Fire Extinguisher

jcb RTFL 940
200 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Routine Maintenance
Fire Extinguisher (if fitted)
162 162
9811/5700-7
Fire Extinguisher (if fitted)
T3-022
Checking the Fire Extinguisher
Check the fire extinguisher for damage, security and signs
of leaking.
Check that the gauge A indicates that the extinguisher is
charged i.e. the needle is in the GREEN segment.
Note: If the needle is in or very near the RED segment at
either end of the gauge, the extinguisher must be serviced
or replaced.
Make sure the safety pin B is fitted and secure.
The extinguisher should be serviced every 12 months by a
suitably qualified person.
Fig 129.

Table of Contents

Related product manuals