jcb RTFL 940 - Pre-Start Cold Checks, Service Points and Fluid Levels

Routine Maintenance
Service Schedules
94 94
9811/5700-7
Pre-start Cold Checks, Service Points and Fluid Levels
Operation 10 50
(1)
100
500 1000 2000 6000
ENGINE
Coolant Quality and Level - Check

Cooling System - Drain and Refill

Oil level - Check

Oil and Filter
(2)(3)
- Change

Air Cleaner Dust Valve
(4)
- Change

Air Cleaner Outer Element
(4)
- Change

Air Cleaner Inner Element
(4)
- Change

Pre-Cleaner (if fitted) - Check

Water Separator and Engine Fuel Filter - Drain

Water Separator Fuel Filter
(5)
- Change

Engine Fuel Filter - Change

Front End Accessory Drive (FEAD) Belt
Condition
- Check

Front End Accessory Drive (FEAD) Belt - Change

Engine Mounting Bolts for Tightness - Check

All Hoses - Condition - Check

Radiator
(4)
- Clean

Breather Gauze - Clean

Valve Clearances
(6)
- Check and Adjust

Oil Filler and Dipstick Seals
(6)
- Check and Adjust

Rocker Cover and Injector Seals
(6)
- Change

Injectors
(6)
- Change

Injector(s) Leak Off Rail
(6)
- Change

High Pressure Fuel Lines
(6)
- Inspect

TRANSMISSION, AXLES AND STEERING
Transmission Oil Level - Check

Transmission Oil
(7)
- Change

Transmission Filter - Change

Transmission Strainer - Clean

Front Axle Oil Level - Check

Front Axle Oil - Change

Rear Axle Differential Oil Level (4WD) - Check

Rear Axle Differential Oil (4WD) - Change

Rear Axle Hub Oil Level (4WD) - Check

Rear Axle Hub Oil (4WD) - Change
