Routine Maintenance
Electrical System
132 132
9811/5700-7
Relays
All Models
The relays are located behind the side console J. They are
separated into the banks.
To access the relays, unscrew the five fasteners K and
remove the panel.
Important: Isolate the machine's electrics before
removing the panel.
Fig 95. Side Console
Note: All the relays are shown (including optional
equipment relays). Your machine may not be equipped
with all the relays shown.
Fig 96.
A Buzzer
B Flashers
C Park brake lamp
D Ignition
E Neutral start
F Transmission dump
G Forward
H Reverse
To Next Page
Loading...
