jcb RTFL 940 - Functional Test and Final Inspection

Routine Maintenance
Service Schedules
97 97
9811/5700-7
Functional Test and Final Inspection
Operation 10 50
100
(1)
500 1000 2000 6000
ENGINE
Idle Speed
(2)
- Check and Adjust

Torque Converter Stall Speed
(2)
- Check

Max. No-Load Speed
(2)
- Check and Adjust

Exhaust Smoke - Check

Exhaust System Security
(2)
- Check

Air Inlet System Security - Check

Throttle System and Control Cable
(2)
- Check

Engine for Vibration/Noise
TRANSMISSION, AXLES AND STEERING
Neutral Start Operation - Check

2WD/4WD Selection - Check

Forward/Reverse and Gear Change -
Operation
- Check

Transmission Operation - Check

Transmission Main Line Pressure
(2)
- Check

Transmission for Leaks - Check
 
Clutch Disconnect - Check

Clutch Pack Pressures
(2)
- Check

Oil Cooler and Pipework - Check

HYDRAULICS
MRV Pressure
(2)
- Check and Adjust

Operation of All Services
(3)
- Check

Hose Burst Protection Valves - Check

All ARVs - Pressure
(2)
- Check and Adjust

Carriage Descent Flow Regulator
(2)
- Check and Adjust

Deration Valve Pressure
(2)
- Check and Adjust

Auxiliary Circuit & Pressures
(2)
- Check and Adjust

Steering Pressure
(2)
- Check and Adjust

Hose Reels - Check

BRAKES
Foot Brake - Operation - Check

Park Brake - Operation - Check

ELECTRICS
Starter Motor - Check

Alternator - Output - Check

Wipers/Washers - Check
