Introduction
Identifying Your Machine
21 21
9811/5700-7
Component Identification Plates
Typical Engine Identification Number
T1-005_3
Engine data labels A are located on the cylinder block at
position C and rocker cover D (if fitted). K Fig 6. ( T 21).
The data label contains important engine information and
includes the engine identification number E.
A typical engine identification number is explained as
follows:
1 Engine Type
S = 4.4 litre series.
2 Engine part number
3 Country of manufacture
U = United Kingdom
4 Engine Serial Number
5 Year of Manufacture
The last three parts of the engine identification number are
stamped on the cylinder block at position B.
C007820-C2
Fig 6. Engine
SA 320/40001 U 00001 04
12345
JCB Dieselmax (Tier 2)
A = Naturally aspirated
B = Turbocharged
C = Turbocharged and intercooled
JCB Dieselmax (Tier 3)
D = Turbocharged
E = Electronic common rail fuel injection
F = Turbocharged and after-cooled
U 00001 04
To Next Page
Loading...
