6- INSTALLATION AND INITIAL START-UP
24
QUANTUM TOUCH
6- INSTALLATION AND INITIAL START-UP
6.1 Unpack the Machine
Warning
Caution
Sharp edges! Risk of cuts to hands.
Wear cut-resistant gloves when carrying out work in the vicinity of sharp edges.
On delivery, check whether the machine has sustained any obvious damage
during transport and/or whether there is any hidden damage. If damage is
identied, inform the relevant transport company immediately.
It is essential to read this operating manual thoroughly before installing the
machine and starting it up for the rst time.
Warning
Dispose of the packaging professionally and environmentally.
Remove all protective lm during installation before powering the machine ON
for the rst time.
This will prevent the lm melting or becoming stuck due to high temperature
when the machine is heating up.
The size of the packing box is 445 mm × 665 mm × 826 mm.
We strongly recommend that you keep the packaging after disassembling the machine for future
transport.
To Next Page
Loading...