25
6- INSTALLATION AND INITIAL START-UP
QUANTUM TOUCH
Caution
Before operating the machine, check the details of the mains power supply in the
country of installation.
Do not connect the machine to a mains supply if voltage uctuations.
Make sure that the electric data of the nameplate are compatible with the
operating conditions where you will install the machine.
Be careful of contamination of the water supply!
Only use water hoses approved by the manufacturer and suitable for drinking
water.
Flush the water hoses thoroughly prior to use.
6.2 Install the Machine
Risk of electric shock.
Never touch live cables and components with wet hands.
Observe the accident prevention regulations regarding electricity.
Only maintenance technician can install the machine.
The machine can only be installed in suitable places, and supervised by trained
personnels.
Warning
The machine must be set up and operated in dry, well-ventilated rooms.
Ensure that there is enough space around the machine to perform
maintenance, cleaning and repair work.
Ensure that the water connection line is not bent.
Danger
To Next Page
Loading...
