1. Turn the ignition switch ON.
2. Press the COMPASS button until the Per-
sonal Settings (Customer-Programmable Fea-
tures) menu displays in the EVIC.
3. Press the SCROLL button until “Compass
Variance” displays in the EVIC.
4. Press and release the FUNCTION SELECT
button until the proper variance zone is se-
lected according to the map.
5. Press and release the COMPASS button to
exit.
Personal Settings (Customer-
Programmable Features)
Personal Settings allows the driver to set and
recall features when the vehicle speed is at
0 mph (0 km/h) (manual transmission) or when
the shift lever is in PARK (auto transmission).
Press and release the MENU button until Per-
sonal Settings displays in the EVIC.
Use the SCROLL button to display one of the
following choices:
Language
When in this display you may select one of six
languages for all display nomenclature, includ-
ing the trip functions and the navigation system
(if equipped). Press the FUNCTION SELECT
button while in this display to select English,
Espanol, Dutch, Deutsch, Italiano, or Francais.
Then, as you continue, the information will
display in the selected language.
Auto Unlock On Exit
When ON is selected, all doors will unlock when
the vehicle is stopped and the transmission is
in the PARK or NEUTRAL position and the
driver’s door is opened. To make your selec-
tion, press and release the FUNCTION SELECT
button until “ON” or “OFF” appears.
RKE Unlock
When Driver Door 1st Press is selected, only
the driver’s door will unlock on the first press of
the Remote Keyless Entry (RKE) transmitter
UNLOCK button. When Driver Door 1st Press is
selected, you must press the RKE transmitter
UNLOCK button twice to unlock the passen-
ger’s doors. When All Doors 1st Press is
selected, all of the doors will unlock on the first
press of the RKE transmitter UNLOCK button.
To make your selection, press and release the
FUNCTION SELECT button until “Driver Door
1st Press” or “All Doors 1st Press” appears.
RKE Linked To Memory — If Equipped
When ON is selected, you can use your RKE
transmitter to recall one of two pre-
programmed memory profiles. Each memory
profile contains desired position settings for the
driver seat, side mirror, adjustable pedals (if
equipped), and power tilt and telescopic steer-
ing column (if equipped), and a set of desired
radio station presets. When OFF is selected,
only the memory switch on the driver’s door
panel will recall memory profiles. To make your
selection, press and release the FUNCTION
SELECT button until “ON” or “OFF” appears.
Refer to “Driver Memory Seat” in “Understand-
ing The Features Of Your Vehicle” for more
information.
138
To Next Page
Loading...
