A WORD ABOUT YOUR KEYS
The keys to your vehicle are double-sided and
can be used in the locks with either side up.
The authorized dealer that sold you your new
vehicle has the key code numbers for your
vehicle locks. These numbers can be used to
order duplicate keys. Ask your authorized
dealer for these numbers and keep them in a
safe place.
Ignition Key Removal
Automatic Transmission
1. Place the shift lever into PARK.
2. Turn the key to the ACC position.
3. Push the key and cylinder inward slightly
and rotate the key to the LOCK position.
4. Remove the key from the lock cylinder.
Manual Transmission — If Equipped
1. Turn the key to the ACC position.
2. Push the key and cylinder inward slightly
and rotate the key to the LOCK position.
3. Remove the key from the lock cylinder.
NOTE:
• For vehicles not equipped with the Elec-
tronic Vehicle Information Center (EVIC),
features such as the power window
switches, radio, power sunroof or Sky
Slider姞 (if equipped), and power outlets
will remain active for 45 seconds after the
ignition switch is turned to the LOCK
position. Opening either front door will
cancel this feature.
• For vehicles equipped with the EVIC, fea-
tures such as the power window
switches, radio, power sunroof or Sky
Slider姞 (if equipped), and power outlets
will remain active for up to 10 minutes
after the ignition switch is turned to the
LOCK position. Opening either front door
will cancel this feature. The time for this
feature is programmable. Refer to “Elec-
Vehicle Key
Ignition Switch Positions
1 — Lock 3 — On
2—Acc 4—Start
12
To Next Page
Loading...
