FLUIDS, LUBRICANTS AND GENUINE PARTS
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant MOPAR姞 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technol-
ogy) or equivalent.
Engine Oil (3.7L Engine) – Non ACEA
Categories
Use API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Material Standard
MS-6395. Refer to your engine oil filler cap for correct SAE grade. SAE 5W-30 engine oil ap-
proved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available.
Engine Oil (3.7L Engine) – ACEA Categories For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils
meeting the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51. SAE 5W-30
engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not
available.
Engine Oil (2.8L Diesel) – with Particulate Filter Use SAE 5W-30 diesel engine oils meeting the requirements of ACEA C3 (LOW ASH).
Engine Oil Filter MOPAR姞 Engine Oil Filter or equivalent.
Spark Plugs – 3.7L Engine ZFR6F-11G (Gap 0.043 in [1.1 mm])
Fuel Selection – 3.7L Engine 91 Octane
Fuel Selection – 2.8L Diesel Engine 50 Cetane or higher (Less than 50 ppm Sulfur)
259
To Next Page
Loading...
