3. Pull the taillamp housing straight back to
separate it from the vehicle.
4. Disconnect the electrical connector.
5. Remove the two screws that fasten the back
plate to the taillamp housing.
6. Separate the back plate from the taillamp
housing.
7. Pull the appropriate bulb(s) out of the back
plate and insert the replacement bulb(s).
8. Install the back plate and screws into the
taillamp housing.
9. Connect the electrical connector.
10. Install the taillamp housing and screws.
11. Close the liftgate.
FLUID CAPACITIES
U.S. Metric
Fuel (Approximate)
3.7L Engine 19.5 Gallons 73.8 Liters
2.8L Diesel Engine 18.5 Gallons 70 Liters
Engine Oil with Filter
3.7L Engine 5 Quarts 4.7 Liters
2.8L Diesel Engine 7 Quarts 6.6 Liters
Cooling System *
3.7L Engine (MOPAR姞 Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula or
equivalent)
14 Quarts 13 Liters
2.8L Diesel Engine (MOPAR姞 Antifreeze/Engine Coolant 5 Year/100,000 Mile For-
mula or equivalent)
13 Quarts 12 Liters
* Includes heater and coolant recovery bottle filled to MAX level.
258
To Next Page
Loading...
