Jensen CD-785 - CD Search, Repeat, and Programming; CASSETTE PLAYING AND RECORDING; General Cassette Operations

E15
 SEARCH MODE
1. During PLAY mode, press and hold the BUTTON (#22) for few seconds, it will
start searching forward.
2. During play mode, press and hold the BUTTON (#24) for few seconds, it will start
searching backwards.
 REPEAT PLAY
During CD playback, press the MODE BUTTON (#13) repeatedly to select a different
playback mode:
REPEAT ONCE > REPEAT ALL > RANDOM > OFF
This function allows you to repeat 1 single track or repeat all tracks or play all tracks
randomly in the disc.
NOTE : Repeat function is possible in normal or programmed playback.
CD PROGRAMMING
Up to 20 tacks can be programmed to be played in any required order from the CD.
1. Set in CD mode and press the STOP BUTTON (#14).
2. Press the PROGRAM BUTTON (#12) to enable CD programming mode, PROG icon
and program number “P01” will flash on the LCD DISPLAY (#11) to prompt for input.
3. Press the BUTTON (#22) or BUTTON (#24) to select the desired track.
4. Press the PROGRAM BUTTON (#12) to confirm, program counter advances to “P02”
and flash to prompt for input.
5. Repeat steps 3 to 4 to enter additional programs. The display will show “FU” when all
the preset locations are full.
6. Press the button to start playback in order.
7. Press the button to stop playback and press it twice to clear all programmed
tracks. “PROG” icon will go off.
CASSETTE PLAYING AND RECORDING
GENERAL OPERATION
STOP / EJECT BUTTON Press to stop all deck operation. Press again to open
the cassette door.
FAST FORWARD BUTTON Press to start rapid tape winding forward direction.
Press stop / eject key when the cassette spools stop
turning.
REWIND BUTTON Press to start rapid tape winding reveres direction.
Press stop / eject key when the cassette spools stop
turning.
PLAY BUTTON Press to start playing tape.
PAUSE BUTTON Press to stop tape operation temporarily. Press again
to resume.
RECORD BUTTON Press together with play key to start tape recording.
PLAYBACK
1. Tap the POWER BUTTON (#7) to turn on the unit.
2. Tap the FUNCTION BUTTON (#18) to select Cassette mode, the TAPE icon and
“tAP” will show on the LCD DISPLAY (#11).
3. Put in the cassette tape.
4. Press PLAY BUTTON to active playback.
5. Adjust the VOLUME CONTROL (#26) to the desired level.
6. Use PAUSE BUTTON when you want to stop playback temporarily.
7. Press STOP / EJECT key when finished.