Why does the Jensen CD-485 sound distorted at high volume?
If the sound from your Jensen Stereo System is distorted when the volume is high, it's likely because the volume control is set too high. Try lowering the volume to a more comfortable level.
What to do if the Jensen Stereo System CD player skips?
If the CD player in your Jensen Stereo System skips, the disc might be dirty or scratched. Try wiping the CD with a clean cloth or using a different disc.
Why is there no sound from my Jensen Stereo System on AM or FM?
If you're not getting any sound on AM or FM from your Jensen Stereo System, make sure the function switch is set to either the “AM” or “FM” position. Also, check that the volume isn't set to the minimum; try increasing it.
How to fix noise or distorted sound on Jensen CD-485 AM/FM broadcast?
To fix noise or distorted sound on AM or FM broadcast with your Jensen Stereo System: - Retune the AM or FM broadcast station. - For FM, extend the FM telescopic antenna. - For AM, reposition the unit until you get the best reception.
What to do if Jensen Stereo System CD player won't play?
If the CD player on your Jensen Stereo System isn't playing, ensure that the unit is in CD function mode. Also, check that the CD is loaded correctly with the label side up. If you're using a self-compiled CD, the media might not be compatible; try using better quality blank media.
What causes intermittent sound from Jensen CD-485 CD player?
Intermittent sound from your Jensen Stereo System CD player can be caused by a dirty or defective disc; try cleaning or replacing the disc. A dirty pick-up lens could also be the issue; use a CD lens cleaning disc to clean it. Excessive shock or vibration may also cause this issue; relocate the player away from such disturbances.
General| Brand | Jensen |
|---|---|
| Model | CD-485 |
| Category | Stereo System |
| CD Player | Yes |
| Disc Formats | CD, CD-R, CD-RW |
| Tuner | AM/FM |
| USB Port | Yes |
| Remote Control | Yes |
| Bluetooth | No |
| Speakers | 2 |
| Connectivity | USB |
| Auxiliary Input | 3.5mm |
| Power Source | AC 120V |
Provides essential safety guidelines for using the appliance, covering electrical and environmental aspects.
Advises users on safe operation of the laser component and risks of exposure.
Details FCC rules regarding interference and user actions to correct it.
Instructions for connecting and operating the unit using AC power.
Guidance on installing batteries, care, replacement, and potential hazards.
Instructions for tuning radio stations and tips for achieving the best reception.
Steps for playing, pausing, resuming, and managing repeat playback modes for CDs.
Guide to skipping tracks, searching within tracks, and programming custom playback sequences.
Instructions for connecting external audio sources via the AUX IN jack.
Guidance on using headphones, including volume level warnings for hearing protection.
Recommends using felt pads to prevent marks on furniture from the unit's rubber feet.
Instructions for cleaning the unit, avoiding damage, and maintaining performance.
Lists common symptoms, causes, and recommended solutions for device malfunctions.
Details warranty coverage, exclusions, and procedures for obtaining service or repairs.
To Next Page
