E-9
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the CD SKIP + BUTTON (#4) or CD SKIP -
BUTTON (#5) to go to the next track or go back to the beginning of the current track.
2. During play mode or Pause mode, press and hold the the CD SKIP + BUTTON (#4) or
CD SKIP - BUTTON (#5) to search within the current track with audible high speed
playback.
PROGRAM PLAY MODE
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1. Press the PROGGRAM BUTTON (#8) once. The program number 01 and the PROGRAM
INDICATOR (#17) both will flash.
2. Tap the CD SKIP + BUTTON (#4) or CD SKIP - BUTTON (#5) to select the track to
be programmed.
3. Press the PROGRAM BUTTON (#8) again to store the selection. The program number will
advance to 02 and flash to prompt for the next input.
4. You may repeat steps 2 to 3 to program up to 20 tracks. As soon as you have entered the
20th track, the LED DISPLAY (#14) will automatically show the programmed tracks one by
one in their correct sequence starting from the first. At the end of program review, program
number 01 and the PROGRAM INDICATOR (#17) will both flash.
5. Press the CD PLAY/PAUSE BUTTON (#7) to complete and start program play. The
PROGRAM INDICATOR (#17) will light up. Press the CD STOP
BUTTON (#6) to stop.
6. Normally all the programmed tracks will be played through once and then stop. However, you
may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all tracks
(Repeat All) in the program. You may also tap the CD SKIP + BUTTON (#4) to go directly
to other tracks ahead or the CD SKIP - BUTTON (#5)
to go back to previous track(s)
during program play.
7. To edit the programmed tracks during program playback, press the CD STOP
BUTTON
(#6) and then the PROGRAM BUTTON (#8). Program number 01 on the LED DISPLAY (#14)
and PROGRAM INDICATOR (#17) will both flash.
a. If you do not want to change any track in the program, press the CD STOP
BUTTON
(#6).
b. To edit a programmed track, tap the PROGRAM BUTTON (#8) repeatedly until you reach
the program number whose track you want to change. Tap the CD SKIP + BUTTON
(#4) or CD SKIP - BUTTON (#5) to select a new track and press PROGRAM
BUTTON (#8) to confirm.
8. To cancel program play, press the CD STOP
BUTTON (#6) twice while program playback
is running or open the CD DOOR in stop mode. The PROGRAM INDICATOR (#17) will go off.
.
To Next Page
Loading...
