Jensen CMN86 - Audio Settings Adjustment

9
CMN86 OPERATION
Audio Settings
Press AUDIO to display and adjust the following audio
settings.
Adjust the EQ screen to select EQ settings for the
current source. The unit had source tone memory,
meaning that it will remember the selected EQ settings
for each source.
1. Adjust the volume level for the current source.
2. Displays the EQ Settings for the current source.
3. Turns the Loudness function on or o󰀨.
4. Press to reset to the default audio settings.
5. Press to return to the source screen.
6. Select a preset EQ, or select User for custom settings.
7. Press to display and adjust Balance / Fader screen.
Adjust the Balance / Fader screen to select Balance,
Fader and Subwoofer settings. These controls do not
have source tone memory.
1. Adjust the volume level of the unit.
2. Adjust the fader and balance settings to distribute
audio as desired front to back and left to right.
3. Adjust the subwoofer level.
4. Press to reset balance, fader and subwoofer to default
settings.
5. Press to return to the source screen.
6. Return to EQ control screens.
Audio
Equalizer
Balance / Fader
2
3
1
7
5
6
4
2
1
7
6
5
3
4