39
An empty will appear on the
second line of the display to
indicate the minimum signal
strength for acceptable listening�
After a few seconds, the row of
solid rectangles will indicate the
actual signal strength that you are
receiving� The stronger the signal,
the further to the right the row of
solid rectangles will be�
Note: You may need to adjust
the aerial or move your radio to
get the strongest possible signal�
4. Press and hold the ‘Info/Menu’
button to return to the station
display�
Prune DAB stations
You can remove the DAB stations
in the station list that cannot be
received in your area� These are
listedwitha‘?’prex.
1. Press and hold the ‘Info/Menu’
button on the front of the radio
until ‘<Full scan>’ is displayed�
2. Use the left hand rotary
contr
ol to scr
oll to
‘<Prune>’�
Press the left hand rotary control
to ‘Select’�
3. ‘Prune <No> Yes’ is displayed�
Use the left hand rotary control
to scroll to ‘Yes’� Press the rotary
control to ‘Select’ and prune
the station list� Stations with a
‘?’prexwillnownolongerbe
displayed�
4. Press and hold the ‘Info/Menu’
button to return to the station
display�
Storing a DAB station preset
Your radio can store up to
10 DAB stations in its preset
memories for instant access to
your favourite stations�
Note: When you store DAB
radio station presets, these do
not overwrite your FM station
presets�
1. Tune your radio to the station
that you wish to preset (see
changing DAB stations on page 9)�
2. Press and hold the ‘Preset’
button on the front of your
radio� ‘Preset Store 1 (Empty)’ is
displayed if no previous station
has been stored�
3. Use the left hand rotary control
to move to the preset location
that you would like to store the
radio station to (1-10)�
4. Press the left hand rotary
control to ‘Select’� The display will
conrm‘PresetXstored’,where
‘X’ is the number of the preset
(1-10)�
Note: If there is already an
existing DAB station stored under
a preset, it will be over written
when you store the new station�
To Next Page
Loading...
