Jensen DL500 - System Settings; Sleep Timer; Set the Date and Time

50
Your radio must be switched on
(not in Standby mode) when you
change the system settings�
Sleep timer
You can set your radio to turn
off automatically using the sleep
timer� You can choose from 15, 30,
45, 60 and 90 minutes or Off�
1. Press and hold the ‘Info/Menu’
button on the front of your radio�
2. Use left hand rotary control
to scroll to ‘<System>’� Press to
‘Select’�
3. ‘<Sleep>’ is displayed� Press to
‘Select’ again�
4. Use the left hand rotary
control to display the sleep time
you would like� Press to ‘Select’
andconrm.
The number of minutes until your
radio will automatically switch off
will appear in the far right of the
display
Note: To cancel the sleep time,
follow the steps above and in step
4�, use the left hand rotary control
to display ‘Sleep off’� Press to
‘Select’andconrm.
Manually set the date and
time
1. Press and hold the ‘Info/Menu’
button on the front of your radio�
2. Use left hand rotary control
to scroll to ‘<System>’� Press to
‘Select’� ‘<Sleep>’ is displayed�
3. Use the left hand rotary
control to scroll to ‘<Time>’�
Press to ‘Select’� ‘<Set Time/Date>’
is displayed� Press to ‘Select’ again�
4. ‘Set Time’ is displayed and the
hourdigitswillash.Usetheleft
hand rotary control to display the
correct hour in 24 hour clock�
Press to ‘Select’�
5.Theminuteswillash.Usethe
left hand rotary control to display
the correct minutes� Press to
‘Select’�
6. ‘Set date’ is displayed and the
‘Day’willash.Usethelefthand
rotary control to display the day�
Press to ‘Select’�
7. The‘Month’willash.Usethe
left hand rotary control to display
the month� Press to ‘Select’�
8.The‘Year’willash.Usetheleft
hand rotary control to display the
year� Press to ‘Select’� ‘Time Saved’
is displayed and then returns to
‘<Set Time/Date>’�
System settings