Jensen DL500 - Recalling FM preset stations

43
2. Press and hold the ‘Preset’
button on the front of your
radio� ‘Preset Store 1 (Empty)’ is
displayed if no previous station
has been stored�
3. Use the left hand rotary control
to move to the preset location
that you would like to store the
radio station to (1-10)�
4. Press the left hand rotary
control to ‘Select’� The display will
conrm‘PresetXstored’,where
‘X’ is the number of the preset
(1-10)�
Note: If there is already an
existing FM station stored under
a preset, it will be over written
when you store the new station�
Tune to an FM preset station
In FM mode:
1. Press and release the ‘Preset’
button on the front of the radio�
‘Preset Recall 1’ is displayed and
the name or frequency of the
station stored there, or Preset
Recall X (Empty)’ if no previous
station has been stored�
2. Use the left hand rotary control
to move to the preset location
that you would like�
3. Press the left hand rotary
control to ‘Select’� The radio will
tune to that station and begin to
play�
Note: If no FM station has been
stored under the preset, ‘Preset
Empty’ will be displayed and the
radio will revert to the previously
selected radio station after a few
seconds�
FM display information
When listening to an FM station
you can change the information
that will appear on the second
line of the display by pressing the
‘Info/Menu’ button multiple times
to select your preferred display
information� There are several
different types of information that
are sent by the broadcaster�
Radiotext (RT)
This is scrolling text information
supplied by the broadcaster�
Information could be the name
of an artist or music title, DJ’s
name, contact details for the radio
station etc�
Program Type (PTY)
Such as ‘Rock’, ‘Pop‘, Talk’ or
‘News’
Frequency
Such as 93�30MHz
Station name
Such as BBC R4