40
Tune to a DAB preset station
In DAB mode:
1. Press and release the ‘Preset’
button on the front of the radio�
‘Preset Recall 1’ is displayed and
the name or frequency of the
station stored there, or Preset
Recall X (Empty)’ if no previous
station has been stored�
2. Use the left hand rotary control
to move to the preset location
that you would like�
3. Press the left hand rotary
control to ‘Select’� The radio will
tune to that station and begin to
play�
Note: If no DAB station has
been stored under the preset,
‘Preset Empty’ will be displayed
and the radio will revert to the
previously selected radio station
after a few seconds�
DAB display information
When listening to a DAB station
you can change the information
that will appear on the second
line of the display by pressing the
‘Info/Menu’ button multiple times
to select your preferred display
information� There are several
different types of information that
are sent by the broadcaster�
Dynamic Label Segment (DLS)
This is scrolling text information
supplied by the broadcaster�
Information could be the name
of an artist or music title, DJ’s
name, contact details for the radio
station etc�
Signal strength
The information provided gives
details of the signal strength
you are receiving� An empty
will appear on the second line
of the display to indicate the
minimum signal strength for
acceptable listening� The row
of solid rectangles indicate the
actual signal strength that you are
receiving� The stronger the signal,
the further to the right the row of
solid rectangles will be�
Program Type (PTY)
Such as ‘Rock’, ‘Pop‘, Talk’ or
‘News’
Multiplex name
Displays the broadcasting area and
collection of radio stations on this
frequency e�g� BBC National DAB,
Digital 1 Network�
Channel and Frequency
eg: 12B 225�64 MHz
To Next Page
Loading...
