Why is there no sound coming from my Jensen HD1BT Car Receiver?
If you're not hearing any sound from your Jensen Car Receiver, the volume might be set too low, so try adjusting it to a more audible level. Another potential cause is improperly connected wiring. In this case, carefully check all wiring connections to ensure they are secure.
What to do if my Jensen HD1BT has no power?
If your Jensen Car Receiver isn't powering on, first ensure the vehicle’s accessory switch is activated by switching the ignition key to “ACC,” assuming the power supply is correctly connected. If it still doesn't power on, check the fuse and replace it if it's blown.
What to do if my Jensen Car Receiver displays ERROR-03 on the LCD?
If your Jensen Car Receiver shows an ERROR-03 message on the LCD, this indicates an abnormal current to the USB device. Try changing the mode or unplugging and then reconnecting the USB device.
What does ERROR-02 mean on my Jensen HD1BT Car Receiver LCD and how to fix it?
If your Jensen Car Receiver displays ERROR-02 on the LCD, it means there are no songs on the connected device. To resolve this, remove the device and add songs to it.
What does ERROR-01 mean on my Jensen HD1BT Car Receiver LCD and how do I fix it?
If you see ERROR-01 on the LCD of your Jensen Car Receiver, it indicates a database or decoder error. Try changing to another mode to resolve this issue.
How to fix a Jensen Car Receiver that won't tune to a radio station?
If your Jensen Car Receiver isn't tuning to radio stations or the auto-seek function isn't working, start by checking the antenna cable. Ensure it is firmly inserted. If the signals are too weak, try selecting a station manually.
What does ERROR-04 mean on my Jensen HD1BT Car Receiver and how to solve it?
If your Jensen Car Receiver displays ERROR-04, it means the connected iPod/iPhone is not verified. Try unplugging and then reconnecting your iPod/iPhone.
Why are the operation keys not working on my Jensen HD1BT Car Receiver?
If the operation keys on your Jensen Car Receiver aren't working, it could be due to a couple of reasons. First, the control panel might not be properly installed; try reinstalling it. Second, noise might be affecting the built-in microcomputer. In this case, press the RESET button.
Details correct power supply requirements and critical warnings regarding operation and repair.
Explains the physical installation process and specific instructions for Harley-Davidson models.
A crucial warning about connecting the +12VDC ACC switched wire correctly to avoid damage.
Details the Weather Alert function and SAME decoding for geographical alerts.
Explains file playing order, folder navigation, and how to select songs or folders.
Details playback controls including pause, repeat, random play, and track selection.
Guides on accessing SiriusXM mode, finding the Radio ID, and activating the tuner.
Covers selecting bands, categories, manual tuning, and direct tuning for SiriusXM channels.
Explains storing, recalling, scanning, and sequentially tuning SiriusXM preset channels.
Details resetting a forgotten lock code and setting up channel locking.
Lists common advisory messages from the SiriusXM tuner and provides causes and solutions.
Details connecting an iPod/iPhone, accessing iPod mode, and turning the device on/off.
Covers controlling playback, selecting tracks, and searching music libraries on the iPod.
General| Bluetooth | Yes |
|---|---|
| USB Port | Yes |
| Aux Input | Yes |
| AM/FM Radio | Yes |
| Display Type | LCD |
| Type | Single DIN |
| DIN Size | Single DIN |
| SD Card Slot | No |
| Preamp Outputs | Yes |
| HD Radio | No |
| Siri Eyes Free | Yes |
| Remote Control | Yes |
| Power Output | 50 Watts x 4 |
| Peak Power Output | 50 Watts x 4 |
To Next Page
