Jensen MS3A - TROUBLESHOOTING; No power; No AM;FM Reception; No sound

13
MS3A
TROUBLESHOOTING
Table 1: Troubleshooting
Problem
Solution
No power
If the power supply is connected to the vehicle accessory circuits but the engine is not on, switch
the ignition key to “ACC”
Fuse may be blown. Replace with 10AMP ATO fuse.
No AM/FM Reception
Antenna cable not connected; insert antenna cable firmly.
No sound
Check volume level; increase volume if necessary.
Check power; make sure device is on.
Check device; press the play/pause button to ensure unit is not in Pause mode.