Jensen SMPS-628 - Preparation for Use; Installing the Unit Under a Cabinet

E-3
 Main Unit X 1
 AC adaptor X 1
 User Manual X 1
 Mounting kit X 1
PREPARATION FOR USE
LOCATION OF CONTROLS
14 15
16
17
13
12
1
23456 7 8 910
11
18 19
Unpack the unit carefully to remove all the accessories from the packing. Verify that
the following accessories are present before setting up the unit.
Installing the unit under a cabinet
Accessories
LINE IN
1. Make the position of the 3 holes by using the supplied template. Use a drill to make
the holes.
2. When the cabinet door overhangs the shelf and obstructs the unit, you can adjust
the unit/shelf height.
3. Install the unit with the supplied mounting kit.