Jensen VM9314 - Controls and Indicators; Unit Controls Overview

VM9314 <lENSEO
CONTROLS AND INDICATORS
1. Rotary Encoder
Rotate to adjust the volume. While in the audio menu, press and release to
enter and/or confirm audio settings.
Press to activate the MUTE function and silence the receiver. Press again to
resume sound.
2. SRC
Press to turn the unit on.
Press and holdto turn the unit off.
When on, press to view the SOURCE menu.
3. IR Remote Control Receiver
4. USB Interface Connector
Connect a USB device for playback of music/video files.
5. TFT Display
6. 3.5mm AN Input
Attach a compatible AN device.
7. DISC SLOT
8. A EJECT
Press to eject a disc.
Press and hold to reset core mechanism position.
9. SD Card Slot
Insert an SD/MMC card for playback of music/video files.
10. RESET
Press to reset system settings to factory default (except the password and
parental lock setting).
11. LCD Display
12. TILT/ »1
Press to activate the tilt function. Use the rotary encoder to make adjustments
while the yellow tilt icon is flashing.
With the monitor closed, press to seek forward.
7