Jensen VM9314 - Operating Instructions; Power On and Off

VM9314
OPERATING INSTRUCTIONS
Power On I Off
Press the c!>/SRC button (2) on the unit (or the c!> button (4) on the remote
control) to turn the unit on. The buttons on the front of the unit light up and the
current
mode status appears in the LCD (11). You can also turn on the unit by
pressing the OPEN button (15) and opening the TFT screen.
Press and holdthe c!> button to power off the unit. The monitor is drawn back
into
the main compartment.
Remote Control Functions
Table 2: Common Remote Control Functions
SRC
select playing source
MUTE
Toggle audio output on/off
POWER/<!>
Turns the power on/off
VOL-
Decreases volume
VOL +
Increases volume
MENU View SOURCE menu
SETUP View the system setup menu
I ..
Screen navigation (does not apply to all screens/menus)
.. I
..
..
~II
Enter command during menu navigation or PlaylPause
~
Open/close TFT monitor
1-9,0, *, #
Direct entry
PIC
View setup menu and touch "SCREEN" to adjust auto dimmer and
backlight
OPEN/CLOSE
Open/close TFT monitor
EQ
Access equalizer menu
~/~b
Adjust monitor angle up/down
PTT
Push to talk
14