Jensen VM9314 - Rear Camera Function; Camera Integration and Display; Error Messages; Loading Error

VM9314
REAR CAIVIERA FUNCTION
This unit is "camera ready." Before accessing any camera features, you must
install a
rear video camera. When the camera is not installed and the function
is accessed by gear selector being placed in reverse or by the unit's menu, the
message "NO VI OED SIGNAL" will appear, indicating the function is not
available.
When the camera is installed, the rear view image ofwhat's behind the vehicle
will
appear when the vehicle's is placed in reverse gear. When leaving reverse
gear, the unit displays the previous screen. The rear camera image can be
adjusted from Normal to Mirror using the "Setup" menu (see "VIDEO Sub-
menu Features" on page 25).
71