Jensen VM9726BT User Manual

24
VM9726BT
NOTE: If the rear-view video camera is connected and the unit is on, Camera mode
is selected upon shifting into REVERSE gear. If the monitor is in display mode, the
monitor automatically switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor returns to its original input mode.
General Sub-menu Settings
Setting Options Function
User Interface
Color
Aqua This setting allows the user to select ve
pre-dened LED colors for the front panel
illumination.
Red
Blue
Amber
Green
Tuner Region USA
• AM Frequency Spacing - 10 kHz
• AM Frequency Band - 530 kHz ~ 1720 kHz
• FM Frequency Spacing - 200 kHz
• FM Frequency Band - 87.5 MHz ~ 107.9 MHz
Europe • AM Frequency Spacing - 9 kHz
• AM Frequency Band - 522 kHz ~ 1620 kHz
• FM Frequency Spacing - 50 kHz
• FM Frequency Band - 87.5 MHz ~ 108.0 MHz
TFT Standby
O Screen remains on continuously.
10s Screen goes blank (standby mode) after 10
seconds of inactivity. Touch the screen to exit
standby and view the display.
20s Screen goes blank (standby mode) after 20
seconds of inactivity. Touch the screen to exit
standby and view the display.
Dimmer
Mode
Auto This setting dims the LCD screen when the
vehicle’s headlights are turned on. Five settings
are pre-dened.
Night
Dark
Normal
Bright
RGB Light Adjust This setting allows the user to tune the RGB
colors of the LEDs to obtain an exact match for
their vehicle.

Jensen VM9726BT Specifications

General

Brand	Jensen
Model	VM9726BT
Category	Car Receiver
Language	English