Jensen VM9726BT User Manual

25
VM9726BT
Beep
Off
No beep sounds.
On
When turned on, an audible beep tone conrms
each function selection.
Background Animation
Star
Allows the user to select a screen background.
The Wallpaper will not appear on the Main
Source Menu, Camera source or EQ settings
page.
Blue Haze
Engine
Button
Animation
Machine
Animation
Wave
Green Cubes
Red Swirl
Tribal
User-
Dened
Calibration Start Press to access the touch screen calibration
function.
Demo On Display various user interface TFT display pages.
Displays the Equalizer and Settings menu pages.
O
Touch Screen Calibration
To access the “Touch Screen Calibration” function from the General sub-menu:
1. Select the “Calibration” Start option. A calibration test pattern appears on the
screen.
2. To begin calibration, touch and hold the crosshair ( + ) that appears in the “1”
icon in the center of the screen. After about one second, the crosshair moves
to the “2” icon in the quadrant.
3. Continue for each quadrant until the calibration is completed.
Demo Mode Features
The Demo mode is to On (Auto run) by default. The Demo mode will display
various user interface TFT display pages such as the Radio, Disc, Aux In, and
Camera sources. The Demo mode will also display the Equalizer and Settings
menu pages. Touching any portion of the touch screen will pause the Demo mode
temporarily. If the touch screen is not pressed again (within 30 seconds) the Demo
mode will resume.
To turn the Demo mode o, access the General Sub-menu Settings and turn Demo
to O.

Jensen VM9726BT Specifications

General

Brand	Jensen
Model	VM9726BT
Category	Car Receiver
Language	English