To Next Page

To Previous Page

VX4025

EXTERNAL DEVICES

Connecting External Devices

External devices, including a game console, video camera, etc. can be connected

to this unit using its front A/V In 3.5mm connector (AV In1), the rear RCA inputs

(AV In 2) or the USB port.

You cannot directly control external devices connected to the A/V inputs using

the front panel controls or this unit’s remote control.

AV In 1

AV In1 is used for playback of audio/video from an external device connected to

the unit through a 3.5mm connector

. The unit can increase or decrease the

volume of the connected device. All other controls are done on the connected

device. Select AV In1 to playback audio/video from the front panel 3.5mm AV In.

AV In 2

AV In2 is used for playback of audio/video from an external device connected to

the RCA connectors located on the back of the unit (see the VX4025 Installation

Guide). The unit can increase or decrease the volume of the connected device. All

other controls are done on the connected device. Select AV In 2 to playback audio/

video from the rear RCA AV In

AV INPUT

OPEN

3.5mm A/V Cable (not included)

V ideo

Left Audio

Right Audio

Ground

USB Cable (not included)

Connecting External Devices

MicroSD card slot

Jensen VX4022A User Manual

Other manuals for Jensen VX4022A