Jensen XA4200 - Specifications; XA Series 4-Channel Amplifiers; XA4200; XA4300

JENSEN"+.': ,z, :
XA4200, XA4300
Specifications
XA Series 4-Channel Amplifiers
Frequency Response ...................................................................................... .20 Hz-20 kHz + 0.5 dB
Signal to Noise Ratio Q Rated Power
....................................................................................
>l 00 dB
Channel Separation Q Ref. Power ...............................................................................
>65 dB, 1 kHz
THD & IMD Q Ref. Power into 2 ohms ...................................................................................... ~0.8%
Speaker Impedance
..............................................................................................................
2-8 ohms
Input Impedance ................................................................................................................. 47 k ohms
Bass Boost Center Frequency .................................................................................................... .45Hz
Crossover ................................................................................................... .12 dB/octave, Butterworth
Power Requirement ...................................................................
14.4 VDC (10.8-l 5.6 VDC allowable)
XA4200
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 Watts per channel RMS, c 0.5% THD
(2 ohms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75 Watts per channel RMS, c 0.8% THD
(4 ohms) bridged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Watts per channel RMS, c 0.8% THD
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3” x 11 .125” x 10” (76mm x 283mm x 254mm)
XA4300
Power output Q 14.4 VDC, 20-20 kHz
(4 ohms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front: 50 Watts per channel RMS, c 0.5% THD
Rear: 100 Watts per channel RMS, c 0.5% THD
(2 ohms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front: 75 Watts per channel RMS, c 0.8% THD
Rear: 150 Watts per channel RMS, c 0.8% THD
(4 ohms) bridged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front: 150 Watts per channel RMS, c 0.8% THD
Rear: 300 Watts per channel RMS, c 0.8% THD
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3” x 11 .125” x 13” (76mm x 283mm x 330mm)
Specifications subject to change without notice.
14