Jet BDB-1340A Owner's Manual

5
Table of Contents
Warranty..................................................................................................................................................2
Warnings.................................................................................................................................................3
Specifications ..........................................................................................................................................4
Table of Contents ....................................................................................................................................5
Contents of the Shipping Container..........................................................................................................6
Uncrating and Clean-Up...........................................................................................................................7
Chuck Preparation...................................................................................................................................8
Lubrication..........................................................................................................................................9-10
Electrical Connections ...........................................................................................................................11
General Description..........................................................................................................................11-12
Controls............................................................................................................................................13-15
Break-In Procedure................................................................................................................................15
Speed Selection.....................................................................................................................................15
Feed and Thread Selection....................................................................................................................15
Change Gear Replacement....................................................................................................................16
Thread Cutting.......................................................................................................................................16
Thread and Feed Chart..........................................................................................................................17
Automatic Feed Operation and Feed Changes.......................................................................................18
Powered Carriage Travel .......................................................................................................................18
Saddle Adjustment.................................................................................................................................18
Cross Slide Adjustment..........................................................................................................................18
Compound Rest Adjustment ..................................................................................................................19
Tailstock Adjustment..............................................................................................................................19
Half Nut Gib Adjustment.........................................................................................................................19
Headstock Alignment........................................................................................................................19-20
Removing/Installing Gap Section ...........................................................................................................20
The specifications in this manual are given as general information and are not binding. WMH Tool Group
reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings,
and accessory equipment deemed necessary for any reason whatsoever.

Jet BDB-1340A Specifications

General

Brand	Jet
Model	BDB-1340A
Category	Lathe
Language	English