Jet JWTS-10 User Manual

7
Features
Specifications
Model Number............................................................................................................................ JWTS-10
Stock Number................................................................................................................................ 708100
Blade Diameter.....................................................................................................................................10"
Arbor Diameter ....................................................................................................................................5/8"
Maximum Depth of Cut .....................................................................................................................3-1/8"
Maximum Rip to Right of Blade.............................................................................................................30"
Maximum Rip to Left of Blade ...............................................................................................................12"
Maximum Depth of Cut at 45° ...........................................................................................................2-1/8"
Table in Front of Blade at Maximum Cut (in) ....................................................................................10-1/2
Maximum Width of Dado..................................................................................................................13/16"
Maximum Diameter of Dado....................................................................................................................8"
Table Height...................................................................................................................................36-1/2"
Table Size (Cast Iron) with Extensions.........................................................................................27" x 44"
Table Size (Cast Iron) without Extensions....................................................................................27" x 20"
Overall Dimensions (D x W x H).................................................................................... 40" x 55-1/2" x 42"
Arbor Speed ............................................................................................................................. 3600 RPM
Motor................................................................................ 115/230V, 60Hz, 1Ph, 1-1/2HP, Prewired 115V
Net Weight......................................................................................................................................205 lbs
Gross Weight..................................................................................................................................214 lbs
The specifications in this manual are given as general information and are not binding. WMH Tool Group
reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings,
and accessory equipment deemed necessary for any reason whatsoever.

Jet JWTS-10 Specifications

General

Blade Diameter	10 inch
Table Size	20 x 27 inch
Max Rip Capacity	30 inch
Arbor Size	5/8 inch
Max Rip to Left of Blade	12 in