Need help?Do you have a question about the Jeti spectraval 1501 and is the answer not in the manual?
General| Stray light | < 0.1 % |
|---|---|
| Interface | USB |
| Power supply | Rechargeable battery or USB power |
| Dimensions | 200 x 100 x 50 mm |
| Weight | 500 g |
| Reproducibility of color coordinates | ± 0.0005 (x, y) |
Step-by-step guide for installing the device driver on Windows.
Procedure to remove previously installed device drivers.
Instructions on how to check the installed driver versions.
Method to access the Windows Device Manager.
Steps for unpacking and connecting the spectraval via USB.
Guide to connecting and pairing the device using Bluetooth.
Configuration steps for network connectivity of the spectraval 1501.
Basic operation and connection of the spectraval 15x1 device.
Instructions on how to charge the device's battery.
Details on the pinout for the external trigger connector.
How to initiate measurements using external signals or switches.
Guide to performing a quick measurement on the spectraval 1511.
How to view measurement results in numerical format.
Personalizing the list of displayed numeric measurement data.
Viewing the light spectrum of the latest measurement.
Adjusting the display range of the spectrum graph.
Displaying chromaticity coordinates in the CIE1931 xy diagram.
Adding RGB color triangle and white point to the diagram.
Viewing chromaticity coordinates in the CIE1976 u'v' diagram.
Showing RGB color triangle on the u'v' diagram.
Displaying Color Rendering Index (CRI) values from measurement.
Displaying the Red, Green, Blue (RGB) values of the measurement.
Changing the color space for RGB value display.
Managing measurement data files on the SD card.
Managing measurement data files on the SD card.
Setting up file saving preferences like auto-save and naming.
Comparing current measurements against stored reference data.
Configuring device and measurement parameters.
Options for device behavior and calibration.
Configuring automatic power-off and idle behavior settings.
Recalibrating the touchscreen for accurate input.
Adjusting parameters for taking measurements.
Averaging multiple measurements for stable results.
Setting the time interval for continuous measurement scans.
Adjusting sync frequency for measuring modulated light sources.
Selecting calibration files for accessories or measurement modes.
Customizing display preferences for measurement data.
Switching between SI and imperial units for display.
Choosing the display format for numerical results.
Customizing which measurement modes are displayed.
Detailed technical specifications for the spectraval 1501 model.
Detailed technical specifications for the spectraval 1511 model.
Physical dimensions and diagrams of the spectroradiometer.
Warranty terms and conditions for the JETI product.
Statement of product compliance with relevant EU directives.
Legal terms and conditions for using the JETI software.
To Next Page