25
- IP address – The IP address of the default gateway and your device Web Admin
Home page.
- Subnet mask – The Subnet mask network setting for your device. The default value
255.255.255.0 is standard for small (class “C”) networks. If you change your LAN IP
Address, ensure that you use the correct Subnet mask for the IP address range
containing the LAN IP address.
- VPN Passthrough– Allowing or preventing connected devices to establish a secure
VPN connection. When turned ON, this feature allows VPN clients on your
connected device to connect through your device to remote VPN servers. The
default setting for this feature is ON. When turned OFF, the VPN clients are not
allowed to connect.
- DHCP (Dynamic Host Configuration Protocol) server – The DHCP server is ON by
default. When turned ON, your router automatically assigns local IPs to connected
devices. When turned OFF, you will need to set it up manually from the device you
want to connect to your router.
- DHCP IP Range – Defines the local IP range that DHCP server can assign to
connected devices.
- DHCP Lease Time - DHCP lease time represents the period between when your
connected device obtained its IP address from your device and the time when it
expires. When the DHCP lease time expires, your connected device automatically
releases IP address and asks your device to give it a new one.
To Next Page
Loading...
