JLG 26MRT - SECTION 1. SPECIFICATIONS; CAPACITIES; COMPONENT DATA; PERFORMANCE DATA

SECTION 1 - SPECIFICATIONS
3120791 – JLG Sizzor – 1-1
SECTION 1. SPECIFICATIONS
1.1 CAPACITIES
Hydraulic Oil Tank
15.0 gallons (56.8 liters)
Hydraulic System (Including Tank)
Approximately 18.0 gallons (68.1 liters)
Fuel Tank
7.8 gallons (29.5 liters)
Drive Axle
3 pints (6.4 liters)
1.2 COMPONENT DATA
Engine
Daihatsu Gasoline/LP
3 cylinder, liquid-cooled
21 horsepower @ 3,000 rpm
Idle - 1,500 rpm
Mid Engine - 2,000 rpm
High Engine - 3,000 rpm
Alternator - 14 Amp
Cooling System Capacity
Engine - 1.9 quarts (1.8 liters)
Crankcase Capacity - 3.2 quarts (3.0 liters)
Yanmar Diesel
3 cylinder, liquid-cooled
22 horsepower @ 3,000 rpm
Idle - 1,200 rpm
Mid Engine - 2,000 rpm
High Engine - 3,000 rpm
Alternator - 40 Amp
Cooling System Capacity
1.0 quarts (0.9 liters) - engine
Crankcase Capacity - 2.5 quarts (2.4 liters)
Drive Pump
Closed loop piston type
Output - 15 gpm (56.8 lpm) @ 3,000 rpm
Displacement - 1.16 in.3/rev. (19.0 cm3/rev.)
Lift/Steer Pump
Gear type
Output - 3.1 gpm (11.7 lpm) @ 3,000 rpm.
Displacement - 0.24 in.3/rev. (4.0 cm3/rev.).
Steer/Drive System
Steer (Front) Tires - Dico Multi-Trac C/S 26 x 12.00 - 12
NHS; 6 ply; inflate to 40 psi (2.8 bar).
Toe-In - Adjust to 1/4 inch (6.4 mm) overall.
Drive (Rear) Tires - Dico Tru-Power TL 26 x 12.00 - 12
NHS; 6 ply; inflate to 40 psi (2.8 bar).
Drive Brake - Mico hydraulic multi-disc.
Drive Motor - Eaton 2000 Series; 8.0 in.3/rev. (131 cm3/
rev.).
Drive Axle - Dana Model 44 rigid semi-float, no spin axle
assembly; 5.89 ratio; oil capacity - 3 pints (1.4 liters).
Hydraulic Filter - Inline
Return - Bypass Type
10 Microns Nominal
Platform Size
Standard - 54 in. x 88 in. (1.4 m x 2.2 m)
1.3 PERFORMANCE DATA
Travel Speed
Maximum Speed - 4.5 mph (7.2 kmh)
Elevated Speed - 0.7 mph (1.1 kmh)
Gradeability
35%
Turning Radius
Inside - 8 ft. 1 in. (2.5 m)
Outside - 15 ft. 4 in. (4.7 m)