JLG 642 - Walk-Around Inspection

Section 2—Pre-Operation and Inspection
2-12 31211031
2.4 WALK-AROUND INSPECTION
Begin your walk-around inspection at item 1, as noted below. Continue to your right
(counterclockwise when viewed from top) checking each item in sequence.
INSPECTION NOTE: On all components, make sure there are no loose or missing parts,
that they are securely fastened and no visible leaks or excessive wear exists in addition to
any other criteria mentioned. Inspect all structural members including attachment for
cracks, excessive corrosion and other damage.
OD1040
1
2
3
4
5
6
7
8
9
11
13
15
16
14
10
12