SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
31217162 2-9
12. Safety Prop - Refer to Inspection Note.
13. Manual Descent - Refer to Inspection Note.
14. QuikLevel Advanced (Dual Oscillating Axles) (If
Equipped) - Refer to Inspection Note.
15. Wheels and Tires - Properly secured, no missing lug nuts.
Inspect wheels for damage and corrosion. Refer to section 6,
Tires and Wheels.
16. Wheel Drive Hub - No evidence of leakage. Refer to Inspec-
tion Note.
17. Spindle, Tie Rod, and Steer Linkage - No loose or missing
parts, no visible damage. No steer cylinder leaks or damage.
18. Static Strap (If Equipped) - Refer to Inspection Note.
19. Engine Installation (If Equipped) - Engine oil to full mark
on dipstick, oil filler cap secure. Muffler/exhaust system
properly secured, no leakage. Air filter assembly secure, no
loose or missing parts, element clean. Radiator cap secure,
coolant to correct level.
20. Scissor Arms and Wear Pads - Refer to Inspection Note.
21. Lift Cylinder - Refer to Inspection Note.
22. Platform Controls - Properly secured, no loose or missing
parts, no visible damage. Placards secure and legible, control
switches return to neutral when activated and released,
emergency stop switch functions properly. Control markings
legible, manual in manual storage box.
23. Platform/Rails Assembly - Refer to Inspection Note.
24. Platform Extension Stops and Rollers - Extension stops
secure and undamaged. Rollers are undamaged, free of
debris, and operate properly.
To Next Page
Loading...
