JLL CT200 - Page 10

10
• Read the instruction manual completely before using the cross trainer.
• Ensure all users wear appropriate footwear on JLL
®
equipment.
• Set up and operate the machine on a level surface. DO NOT operate in small
restricted areas or on plush carpet.
• As far as possible provide the following clearances: 0.5 m at each side and 2 m
at the back. Be sure your machine is clear of walls, equipment and other hard
surfaces.
•DONOTmodifytheunitinanyway.Anymodicationswillvoidthewarranty.
• All the data displayed by the monitor is for reference purposes only.