JLL CT200 - Operation Procedures; Monitor Instructions; Scan Mode; Main Display

19
MONITOR INSTRUCTIONS
SCAN MODE
Whenyourstpoweronthemonitoritwillbesetinascanmode,displayingallyourdata
every few seconds. There will be a scan graphic in the top left corner to indicate this, to
exit scan mode press the mode button.
MAIN DISPLAY
Out of scan mode, continually press the mode button to change what function is
displayed in the large display box.
TARGET PROGRAMS
With the CT200 monitor you are able to set a target time, distance, calories and pulse.
Press the mode button until the function you want to set is showing, then press the set
button continually to increase the digits. Once you’ve set your target, you can either set
another by pressing the mode button to move onto the next setting or start pedalling to
begin your workout.
RESETTING YOUR MONITOR
To reset the digits on your monitor press and hold the reset button, this will return
everything to zero.