JLL CT200 - Cross Trainer Cleaning; Easy Steps to Clean Your Cross Trainer

22
Depending on where the cross trainer is placed, you may experience dry air,
causing a common experience of static electricity. You can notice that by walking
across a carpet and then touching a metal object. On your machine you may
experience a shock due to the build-up of static electricity on your body and the
discharge path of the cross trainer. If you experience this type of situation, you may
wanttoincreasethehumiditytoacomfortablelevelthroughtheuseofahumidier.
Check your machine regularly for rust. If rust starts to appear on the screws it means
the item is not housed in the correct environment and will need to be moved to a more
suitable room. Any rust will indicate there may be moisture in the air and as a result this
could impact on the integrity and performance of your machine.
1. Use only JLL
®
replacement parts.
2. Keep water and liquids away from electrical parts.
3. If you allow your machine to become rusty, this will affect your warranty.
WARNING
3 EASY STEPS TO CLEAN YOUR CROSS TRAINER
Recommendation(thesearejustaguideline):
• Use a clean cloth to wipe down the whole machine.
•Vacuumorsweeptheoorunderneathandaroundthecrosstrainertopreventany
dust going into the machine. A treadmill mat can help to reduce dust.
• Use a vacuum cleaner or a soft damp cloth to clean machines entire cover area.
When not using product for an extended period of time the product should be
folded and stored in a suitable environment.