EasyManua.ls Logo

Jntech JNP22KH-V5 - Page 10

Jntech JNP22KH-V5
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Installing
Ensure inverter not have electrical connections and electricity before installing.
Danger
The solar cell arrays should be covered with opaque materials when installing the
photovoltaic arrays during the day, otherwise the solar cell arrays will generate high
voltage, causing person casualties.
Danger
When the input AC end is connected to the inverter, the ac input side circuit breaker
should be disconnected, otherwise the AC input will produce dangerous voltage,
causing personal casualties.Do not conduct wiring operations by non-professionals.
Warning
Good ventilation should be ensured when the inverter is running.
The inverter should be installed vertically, and no shielding should be guaranteed for
the heat sink.
Warning
Inverter damage caused by the following circumstances will not be covered by the
company's warranty.
When photovoltaic array configuration, ensure that the dc side of the maximum
short-circuit current in the allowed range of the inverter, otherwise it may cause

Table of Contents

Related product manuals