Jntech JNP22KH-V5 - Description of Buttons

59
until fault or status are cleared.
●
When invert is running normally, “RUN” indicator will be lighted in green.
8.1.2 Description of Buttons
Table8-2 Buttons Function Table
Buttons
Name
Functions
“ON/OFF”
Press once to stop; long time press
for 3s to get it started.
“UP”
Page up and increase data. long
time press for Continuous increase.
“DOWN”
Page down and decrease data. long
time press for Continuous reduction.
“ENTER”
To choose and confirm.
+
“DOWN+ENTER”
Return to main interface.
Note
！
When inverter is powered on, LCD display background is lighted,
and after 30s normal running, the background light turns off.