Danger
！
Do not plug or unplug any connector when the inverter is in live state.
Do not open the cover of the machine when the inverter is live!
Notice！
During the operation of the inverter, only the LCD display screen can be touched, and
the heating elements of the machine (such as the radiator) cannot be touched to
prevent burns.
Danger
！
Maintenance work should be carried out by professional maintenance technicians.
Before inspection or maintenance, be sure to disconnect the electrical connection on
the input side of the machine. After waiting for at least 10 minutes, measure the
voltage on the DC side and ac side of the inverter with a voltage meter to ensure that
the operation is carried out without voltage on both the DC side and AC side.
To Next Page
Loading...
