Jofemar Vision Snack Plus - Program Version Information; Machine Control Card Program; ATMEGA Microprocessor Program; Product Detection System Program

vision Snack Plus/Easy Combo // Vending
MNP86V03GBV00 Date: 2010/06/14 Rev. 0 PAGE 48 OF 62
[30] PROGRAM VERSION
When you access this address the display will show the name of the program recorded in
the flash memory of the machine control card.
The display shows the program recorded in the ATMEGA microprocessor which
controls the digital thermometer located in the product hold.
The display shows the program of the product detection system.
[31] CURRENCY CHARACTERS
When you access this address the display will show the three characters currently
programmed. The cursor will highlight the character that can be changed at this time.
If you wish to leave the character blank
[32] DISPLAY LANGUAGE
When you access this address the display will show the language currently programmed
for the texts that appear on the display and on the tickets printed via RS232 using a
printer or terminal.
[33] BUZZER
You can enable or disable the buzzer located on the display control card and the
pushbutton panel. When you access this address the display will show the buzzer status
that is currently programmed.
DESABLED
BEEP
ENABLED
BEEP
BEEP
PROGRAMMING
MONETARY UNIT
PROGRAMMING
LANGUAGE
PROGRAMMING
PRO.DET. SYSTEM
CRPR0D00
ATMEGA Program:
ctrtmp07
Program:
VISD0001
PROGRAM
VERSION
1 2 3+ 4- c-del
"
"
1 2 3+ 4- c-del
"
"
1 2 3+ 4- c-del
"
"
1 2 3+ 4- c-del
"
"
1 2 3+ 4- c-del
"G "
1 2 3+ 4- c-del
"E "
Francais English Castellano