vision
Snack Plus/Easy Combo
//
Vending
MNP86V03GBV00 Date: 2010/06/14 Rev. 0 PAGE 54 OF 62
PROBLEM CAUSE SOLUTION
● All coins are rejected. No
sale is possible and the
display shows a message
saying the machine is out of
service.
● Machine out of service
because of internal
elevator break down,
expired product because of
temperature or because no
motor is connected.
● Check the failure in
machine address 06.
● If there is a fault in the
internal elevator, try to
reset it in address 07.
● In case of product
expiration because of
temperature, remove the
product from the machine
and reset the failure in
machine address 07.
● Should no connected
motor be detected, check
the three motor assembly
located on the transformer
bracket.
● No sales from a channel
with product.
● Insufficient change.
Product expired.
● Problems with the inside
door opening switch.
● Check that when you
select the product the
display shows an out of
change message.
● If a product sold out
message is displayed: the
product may be considered
expired because the date
programmed in address 19
has passed.
● Check that the internal
door opening switch works
properly. otherwise the
product sold out marks will
be deleted.
● No banknotes accepted. ● Insufficient change.
● The banknote has been
inhibited.
● Banknote not recognised
by banknote reader.
● Check whether when the
banknote is rejected there
is an out of change
message on the display.
● Check address 22 for
banknote inhibitions.
● Check banknote
acceptance in address 22.