EasyManua.ls Logo

John Bean B 2000P - Page 3

John Bean B 2000P
252 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iii
SIGLA DESCRIZIONE CODICE LINGUA
SIGLA DESCRIPCIÓN CÓDIGO IDIOMA
SIGLA DESCRIÇÃO CÓDIGO IDIOMA
Manuale Operatore
OM Manual de Operador ZEEWB580A05 ITA-SPA-POR
Manual do Operador
Libretto Ricambi ENG-FRA-DEU
SP tabla de repuestos TEEWB580A3
Lista de peças ITA-SPA-POR
Libretto diSicurezza
SB Manual de Seguridad EAZ0033G02A (x 22)
Manual de Segurança
ABB. DESCRIPTION CODE LANGUAGE
SIGLE DESCRIPTION CODE LANGUE
KENN. BESCHREIBUNG CODE SPRACHE
Operators Manual
Manuel de l’Opérateur ZEEWB580A03
ENG-FRA-DEU
OM Betriebsanleitung
Руководство по эксплуатации
ZEEWB580A08 RU
Spare Parts Booklet ENG-FRA-DEU
SP Liste des pièces détachées TEEWB580A3
Ersatzteilliste ITA-SPA-POR
Safety Booklet
SB Manuel de Securité EAZ0033G02A (x 22)
Sicherheitsvorkehrungen
IMPORTANT SAFETY INSTRUCTIONS
When using this equipment, basic safety precautions should always be followed, in-
cluding the following:
1. Read all instructions.
2. Do not operate equipment with a damaged power cord or if the equipment has been
damaged, until it has been examined by a qualifi ed authorized service technician.
3. If an extension cord is used, a cord with a current rating equal to or more than that
of the machine should be used. Cords rated for less current than the equipment may
overheat. Care should be taken to arrange the cord so that it will not be tripped over
or pulled.
4. Always unplug equipment from electrical outlet when not in use. Never use the cord
to pull the plug from the outlet. Grasp plug and pull to disconnect.
5. To reduce the risk of fi re, do not operate equipment in the vicinity of open containers
of fl ammable liquids (gasoline).
6. Keep hair, loose tting clothing, ngers and all parts of the body away from moving
parts.
7. Adequate ventilation should be provided when working on operating internal combu-
stion engines.
8. To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.
9. Do not hammer on or hit any part of the control panel with weight pliers.
10. Do not allow unauthorized personnel to operate the equipment.
11. Do not disable the hood safety interlock system or bypass the intended operation.
12.
Use only as described in this manual. Use only manufacturers recommended attachments.
13. Always securely tighten the wheel before Spinning the shaft.
14. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant
lenses, they are NOT safety glasses.
15. Balancer is for indoor use only.
SAVE THESE INSTRUCTIONS

Related product manuals