Johnson Controls AIM-200 User Manual

58 Addressable Intelligent Module—AIM-200 Addressable Intelligent Module
Advancing to an Address Range
By pressing any one of Zone Switches 1 through 8, the operator can
advance directly to a desired range of addresses. The AIM-200 will jump
to the lowest address of a programmed device within that range. The
STEP-FORWARD and STEP-REVERSE switches can be used to move to
devices within each range.
Figure 40: Default Zone Map
Display Status Tips:
1. To view module status directly upon entering Display Status mode,
press the switch on Zone 8 and advance through devices 80-99 (if
present). The AIM-200 will begin displaying modules directly after
the last detector.
2. The STEP-REVERSE switch can be used to back into a lower address
range. For example, to view the status of a device with Address “39,”
press the switch for Zone 4, then press the STEP-REVERSE switch
once.

Johnson Controls AIM-200 Specifications

General

Brand	Johnson Controls
Model	AIM-200
Category	Control Systems
Language	English