Wired Controller DWCR2
30
After entering timer off setting page, press “ ” “∧or ∨” button to increase
or decrease timer time by 0.5 h. Press BACK button to return to the last page.
Please refer to Fig. 17.
Fig. 17 Countdown timer off
If timer function is on, the set hours will decrease as the unit operation time
increases. In this case, residual hours can be viewed after entering timer setting page.
This timer function is carried out only once and then it is canceled automatically.
Note:
Once the timer function is turned on, if the unit is turned on or turned off, this
timer function is canceled automatically.