Johnson Controls DWCR2 - Clock Setting

Wired Controller DWCR2
31
3.11 Clock Setting
3.11.1 Time Format Setting
The user can set the time format in 12-hour system or 24-hour system. Select
clock symbol in menu page and then press MENU button to enter clock setting page.
Press “
∧
” or “
∨
” button to select time format and then press “
＜
” or “
＞
” button to
select 12-hour system or 24-hour system. Please refer to Fig. 18.
Fig. 18 Time format selection
3.11.2 Clock Setting
Select clock symbol in menu page and then press MENU button to enter clock
setting page. Press “
∧
” or “
∨
” button to select time set and then press MENU button
to enter time setting.