Accessories
The following table provides the product code number and description for the CV series accessories.
Table 12: CV series controller accessories (order separately)
Product code number Description
XPM Series Expansion Modules Refer to the Facility Explorer CGx, CVx Equipment Controllers and XPM Expansion
Modules Product Bulletin (LIT-12013225) for a complete list of available XPM series
expansion modules.
FX-PCX Series Expansion Input/Output Modules Refer to the FX-PC Series Programmable Controllers and Related Products Product
Bulletin (LIT-12011657) for a complete list of available FX-PCX Expansion I/O
Modules.
FX-FCP-0 License enabling Facility Explorer Equipment Controller Firmware Package Files
required for CCT
Mobile Access Portal (MAP) Gateway Refer to the Mobile Access Portal Gateway Catalog Page (LIT-1900869) to identify the
appropriate product for your region.
FX-DIS1710-0 Local Controller Display
NS-ATV7003-0 Handheld VAV Balancing Tool
NS Series Network Sensors Refer to the NS Series Network Sensors Product Bulletin (LIT-12011574) for specific
sensor model descriptions.
AS-CBLTSTAT-0 Cable adapter for connection to 8-pin TE-6700 Series sensors
NS-WALLPLATE-0 Network Sensor Wall Plate
WRZ Series Wireless Room Sensors Refer to the WRZ Series Wireless Room Sensors Product Bulletin (LIT-12000653) for
specific sensor model descriptions.
WRZ-7860-0 Refer to the WRZ-7860 Receiver for One-to-One Wireless Room Sensing Product
Bulletin (LIT-12011640) for a list of available products.
WRZ-SST-120 Wireless System Survey Tool (for use with the lower power 10mW WRZ and
WRZ-7860 systems)
Refer to the WRZ-SST-120 Wireless Sensing System Tool Installation Instructions
(LIT-24-10563-55) for usage instructions.
WRG1830/ZFR183x Pro Wireless Field Bus System This system is used for installations that support BACnet/IP but can also coexist
with the ZFR1800 Series when installed under the same supervisor such as a
network engine.
Refer to the WRG1830/ZFR183x Pro Series Wireless Field Bus System Catalog Page
(LIT-1901026) for a list of available products.
Y64T15-0 Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 92 VA, Foot Mount,
72.2 cm (30 in.), Primary Leads and 76.2 cm (30 in.) Secondary Leads, Class 2
Y65A13-0 Transformer, 120 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount (Y65AS),
20.32 cm (8 in.), Primary Leads and 76.2 cm (30 in.) Secondary Leads, Class 2
Y65T31-0 Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount
(Y65AR+), 20.32 cm (8 in.), Primary Leads and Secondary Screw Terminals, Class 2
Y65T42-0 Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Hub Mount
(Y65SP+), 20.32 cm (8 in.), Primary Leads and Secondary Screw Terminals, Class 2
ACC-TBKPWFCSA-0 Power, FC Bus, and SA Bus terminal block replacement kit for SNC, CGM, CGE,
CVM, CVE, and XPM products. Kit includes 5 of each terminal block type. 15
terminal blocks in total.
ACC-TBKINOUT-0 Input and Output terminal block replacement kit for SNC, CGM, CGE, CVM, CVE,
and XPM products. Kit includes 5 of each 2, 3, and 4 position Input and Output
terminal blocks. 30 terminal blocks in total.
F4-CV Series VAV Terminal Equipment Controllers Installation Guide 19
To Next Page
Loading...
